background image

By allowing colder outside air in at night, the indoor temperature of the dwelling can be kept low during 
hot days. 
The bypass works automatically. All you have to do is enter your comfort temperature in as described 
in section 3.3 ‘switch setting options’. The Xcell 350V EC BP will work to the temperature set. 

During the winter, ensure that the comfort temperature is not lower than your desired 
temperature. If this is the case, it may result in the heating being on and the bypass being open. 
This is energy wastage.

  

 

3.1.3 Frost protection 

In periods of moderate to heavy frosts, the heat exchanger must be protected against frost-damage. 
The Xcell 350V EC BP is fitted as standard with an automatic frost-protection system that temporarily 
reduces the outside air supply. 
A pre-heater is optional, giving the advantage of ensuring balanced ventilation at all times. This option 
also offers greater comfort as the supplied air is pre-heated to virtually the inside temperature. 
  

3.2 Operation options 
3.2.1 Display  
 
 
 
 
 
 
 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

3.2.2 Switches 

The 3-speed switch (below) can be fitted to the Xcell 350V EC BP to select the desired ventilation 
setting.  
 
 
 
 
 
 
 
 
 
 
 

 

Содержание Xcell 350V EC BP

























Отзывы: