10
December 2020
08/100245/0
User Information
Your home has been fitted with a highly energy efficient mechanical ventilation system. The system should consist of an Everdri
XEL central mechanical supply fan, ducting and discharge diffuser. The correct working system will provide a healthy indoor
atmosphere and will help eliminate condensation and unwanted odours by supplying filtered fresh air into your home.
The fan is designed to run continuously 24 hours a day. It is fitted with an energy efficient electronic motor.
Manual Override Switch Control Options
The Everdri XEL system is supplied with a Manual over-ride switch, allowing you to switch between a low trickle speed (in
Automatic mode) and 2 additional speeds in Manual mode. The high-speed setting
is a boost position to allow for the extract of
cooking smells or moisture-laden air. When in use, it is advisable to open window vents or a window to allow the moisture laden air
to escape. The middle position would be the normal running position in a house with the low speed position as a background
position if the house is not fully occupied. In a smaller dwelling or flat the low speed position could be the normal running position
with the middle position as boost.
▲ ▲
Trickle Mode
▲ ▼
Speed 1
▼ ▼
Speed 2
Maintenance
The fresh air input is protected by a G4 filter which should be annually inspected, cleaned and if required replaced. The following
procedure can easily be used to remove the filter for cleaning or to be replaced if necessary.
WARNING: Make sure that water does not get into the motor or
electrical termination box during cleaning.
Rotate filter locking tabs through 90 degrees
Lift filter straight up taking care not to drop dust into the fan
NOTE:
It is advisable to have the unit inspected by your installer annually.
