XPEECH 1S1O, Руководство по эксплуатации

Страница: 28 / 103

24
SIP Operation Manual
ADSL PPPoE Settings
NOTE: Before setting PPPoE, you must have PPPoE account (121) and PPPoE password (122) provided
by your local Internet Service Provider (ISP).
Select a PPPoE
After entering IVR mode, dial 114 .
You will hear “Enter value”.
Dial 3 to select PPPoE.
Set PPPoE account
After entering IVR mode, dial 121 .
You will hear “Enter value”.
Enter account number and # (speed up dialing).
Example: If the account is “84943122 @ hinet.net”, please enter 08 04 09 04 03 01 02 02 71 48 49 54 45
60 72 54 45 60 #.
NOTE: It is necessary to enter two digits for each character/number; for example, enter “01” for “1” and
“11” for “A”.
PPPoE Password Setting
After entering IVR mode, dial 122 .
You will hear “Enter value”.
Enter password number and # (speed up dialing).
Example: If the password is “3ttixike”, please enter “03 60 60 49 64 49 51 45#”.
Save Settings and Restart
Dial 509 to save settings.
Dial 118 to reboot the gateway.
Wait for about 40 seconds for restart, and then enter 101 to check whether or not the IP
address is retained. If the IP address is not repeated, this indicates that the gateway is not
been properly connected. Please check to be certain that the cable connection, account, or
password are all correct.
Record Greeting File
The gateway allows users to record their incoming call greeting messages when FXO
receives an incoming call.
After entering IVR mode, dial 132 . After hearing “Enter value”, start to record the incoming
call greeting message. Simply hang up the phone to end recording.
After recording, to listen to the recorded message, press 131 . Press 133 to save the
message.