XP Metal Detectors DEUS, Руководство пользователя

Страница: 9 / 64

1 - BASIC 1
2 - GM POWER
3 - DEUS FAST
4 - PITCH
5 - G-MAXX
6 - RELIC
7 - WET BEACH
8 - DRY BEACH
9 - BASIC 2
10 - GOLD FIELD
General use (12 kHz).
Similar settings to the XP Gold Maxx Power detector, powerful and fast.
More selective with small targets on iron-infested field and deeper on
mineralised ground
Responsive pitch that varies in frequency and amplitude according to
the signal’s strength.
Medium speed, particularly effective for large masses and highly conductive
coins.
Slow, for large and deep masses in relatively uncontaminated ground
Wet beaches, although in situ adjustments are needed for the ground
effect, either by pumping or manually (pg 17).
Suitable for dry sand.
Ease of operation with settings that offer greater stability, perfect
for starting out while avoiding false signals (or bottle caps signal).
GOLD FIELD uses another detection method designed for detecting on
ground that is highly mineralised which is often found where gold
nuggets are deposited. In these conditions, targets can be seen as
ground mineralisation or ferrous objects, especially when they are deep.
To go deeper in these difficult conditions, the "Gold Field" program uses
a true All Metal mode that allows you to accept a zone of ground that is
usually not available. Instead of rejecting all the ground values below a
predefined value (as on conventional detectors), it rejects only the
specific value of ground in which you are searching, which means you
have to adjust precisely. To facilitate the ground balance (essential in
this program), pressing will make an immediate acquisition of the
ground value within one or 2 pumps of the coil.
In this program a few settings are not active or are replaced by the
other specific setting such as:
- The IAR discrimination (Iron Amplitude Rejection): A range of
discrimination can be applied from 0 to 5. It applies only to targets
that produce strong signals – typically shallow ferrous items. It will
not reject deeper targets which may come across as ferrous when
they are buried in mineralised ground to ensure good targets are not
rejected by mistake.
- Immediate acquisition of the ground value (Grab) is performed simply
by pressing (while pumping the coil to & from the ground).
The display of conductivity is kept, this advantage allows to
work in All Metals mode with visual recognition (valid on shallow targets).
07