POWERING THE SYSTEM
IMPORTANT!
IMPORTANT! Always power on the transmitter first, then power on the receiver. Always pow-
er off the receiver first, then power off the transmitter. Never power off the transmitter while
running the model.
LINKING THE 2.4GHz RADIO SYSTEM
1. Make sure no other transmitters are turned on in the immediate area.
2. Turn on car.
3. Power on transmitter.
4. The car will be linked to the transmitter.
SYSTEM FACTORY DEFAULT SETTING RESET
To reset the system back to default factory steering trim and drag brake settings:
1. Power off both transmitter and car.
2. Press both ST TRIM buttons.
3. Power on transmitter.
4. LED will flash once.
5. Release ST TRIM buttons.
6. Power off transmitter.
BODY INSTALLATION AND REMOVAL
Cam lock in locked position
1. Slide the tab of the front body mount into the slot on the chassis.
2. Set the rear of the body onto the chassis.
3. Attach the cam lock to capture the rear body mount at the back of the car.
4. Rotate the cam lock 90 degrees to lock in place.
5. Reverse the order to remove.
7
