Xoro HRT 7622, Руководство пользователя

Страница: 25 / 30

ENG 11
Settings (Program/Picture)
Favourite groups
The receiver has 4 favourite groups. You can assign any channel to any group. A channel can be
assigned to several groups.
• Use the ▲/▼ keys to select a channel you want to add to a favourite group.
• Open the favourite groups menu by pressing the
FAV
key.
• Use the ▲/▼ keys to highlight the group you want to assign the channel to.
• After pressing the OK key a symbol appears on front of the respective favourite group.
It is possible select several favourite groups at this point.
Disable
will clear the assignment to all
groups.
Rename channel
Use the ▲/▼ keys to highlight the channel you want to rename and press the
RECALL key. An on-screen-keyboard will appear. Use the ◄/►/▲/▼ keys to highlight the right
letters and confirm your selection by pressing the
OK
key. After completing the name move to the OK
field and press the OK key. The new name has now been assigned to the channel.
Sort
With this option you can sort channels by different parameters (LCN, ONID, name etc.) within a list.
The initial sorting will be overwritten in the process.
LCN (logical channel numbering)
See „LCN“ on page 7.
Aspect ratio
This setting determines what aspect ratio is used on your
television. Content with different aspect ratio will be adapted
by the receiver and displayed on the television screen
accordingly.
4:3 Pan & Scan
Content with different aspect ratio will be displayed full screen, without distor-
tion but with degradation.
4:3 Letterbox
Content with different aspect ratio will be displayed without distortion but may
be displayed with black bars.
16:9 Pillar Box
Content with different aspect ratio will be displayed without distortion but may
be displayed with black bars.
16:9 Pan & Scan
16/9 Transmissions will be displayed full screen, without distortion. 4/3 trans-
missions will be displayed enlarged without distortion. This setting is especially
applicable for 4/3 “Letterbox” transmissions in order to avoid black bars on
screen.
Auto
Only for TVs connected via SCART that can detected the Aspect Ratio by
checking the Voltage Level of PIN8
Resolution
Here you can set the resolution output over the HDMI port (available resolutions: 576i (PAL) / 480i
(NTSC) /576p (PAL) / 480p (NTSC) / 720p /1080i/1080p).
Check the television manual for details concerning the optimal resolution.