Xoro HRT 7610, Инструкция по эксплуатации

Страница: 32 / 36

EN 14
Engl
ish
Settings
Channel Search
Manual Search
You can search for specific TV stations manually. For that
you need to know certain technical parameters (such as
frequency or channel) of the station. The bar display at the
bottom of the screen indicates whether it is possible to
receive a signal with the set parameters. You can also use
the bar display for directing the antenna.
Antenna Power
In case your antenna needs to be supplied with power
(e.g. an indoor antenna with an amplifier but no power
supply unit) by your receiver you need to activate this
function in the menu. You may have to repeat the scan
mode after activating the function.
Note: the receiver will shut off the antenna supply automatically if a of short-circuit or overload oc-
curs.
Country
select the country in which the receiver is to be operated.
Ignore internet service
In case this function is activated the receiver will not save any internet stations while executing the
scan mode.
The receiver cannot connect with the internet and is incapable of transmitting internet stations. This
function is not supported by all DVB-platform providers.
Filter scrambled channels
In case this function is activated the receiver will not save any scrambled stations while executing
the scan mode.
The receiver cannot transmit any scrambled stations.
The receiver sets its internal clock automatically as soon as it receives a channel that transmits the
current time. In order for the receiver to set the time correctly it is necessary to specify the correct
time zone.
Time zone
Auto
The receiver determines the time zone automatically
Manually You can specify the time zone individually
Time zone
If the time zone is set to manually you can specify the time zone. The time zone for Germany is
MGZ +1 .
Auto-Standby
Energy saving in accordance with an EU directive (EuP). The Set Top Box will switch to Standby
after the predefined time if no user activity is detected.
Time