Xoro HRS 8525, Руководство пользователя

Страница: 55 / 78

HRS 8525
ENG 17
Engl
ish
Initial Installation
Preparation:
You will have to be informed of following points to make a successful channel scanning.
•
Towards which Satellite does your antenna orient?
•
If you have more than one antenna or one antenna with more than one LNB, you will have to
know which type of switch (Toneburst or DISEqC) is employed and to which port is each
Antenna LNB connected.
•
For a Unicable/SCR EN50494, you will have to know which IF-Channel is available and its
corresponding Frequency.
Please ask the installer, if any of the parameter is not known. If you live in a rental house or
apartment, please ask the renter.
Example:
The most satellite antenna orient satellite ASTRAS 19.2° and have a “universal” or “Digital” LNB. We
recommend the pre programmed list in the case.
If you would not like to use the pre programmed list, the common setup for ASTRA 19.2° is as
following:
Satellite:
019.2E Astra 1H.
LNB Type: 09750/10/600
LNB voltage: 13/18V
22KHz: AUTO
Tonebust: None
DiSEqC 1.0/1.1: None
Motor: None
Dish Setup –preparation