Xoro HRS 2610, Руководство пользователя

Страница: 17 / 40

ENG 17
Engl
ish
Initial Installation
Preparation:
You will have to be informed of following points to make a successful channel scanning.

Towards which satellite does your antenna ori-
ent?

If you have more than one antenna or one anten-
na with more than one LNB, you will have to
know which type of switch (Toneburst or DIS-
EqC) is employed and to which port is each An-
tenna LNB connected.

For a Unicable/SCR EN50494, you will have to
know which IF-Channel is available and its corre-
sponding Frequency.
Please ask the installer, if any of the parameter is not
known. If you live in a rental house or apartment,
please ask the renter.
Example for Germany:
The most satellite antennas orient satellite ASTRA 19.2° and have a “universal” or “Digital” LNB. We
recommend the pre installed list in the case.
If you would not like to use the pre programmed list, the common setup for ASTRA 19.2° is as fol-
lowing:
Satellite: 019.2E Astra 1H.
LNB Type: 09750/10600
LNB voltage: 13/18V
22KHz: AUTO
Toneburst: None
DiSEqC 1.0/1.1: None
Motor: None
Dish Setup-preparation