Xoro HRS 2610, Руководство пользователя

Страница: 18 / 40

ENG 18
Engl
ish
Initial Installation
On the left side of the screen there is a list of satellites for which the DVB Receiver is pre pro-
grammed. Settings of the chosen satellite is displayed on the right side.
Process:

Select the first satellite to be set up with CH+/CH

Press the OK button. The chosen satellite is marked with a hook, confirming this satellite will
be considered in the coming channel scan.

Press the button VOL+ to access to right side.

Select the option with CH+/- and change the parameter with VOL+/-

Press Menu after defining all parameters for this satellite to get back to the left side.

If your satellite system can receive signals from a number of satellites, select a further satellite
with CH+/-. Press OK and define the parameter on the right side.

Repeat this procedure for all satellites available for your receiver.
Notes:

After a correct setting, an approximate value of the signal quality will be shown on the lower
part of the menu.

If a satellite is missing on the list, press the RED button. A dialogue winter appears, input the
value for longitude, East/West and frequency, and choose “Blind Scan” in the coming channel
scan. If you add a satellite to the list, there will be no display of the signal quality for this satel-
lite, in spite of correct setting. Signal quality could only be displayed for satellites with pre
installed transponder lists.

Press GOTO to display the Transponder of the chosen satellite. Add new transponder with
the RED button and mark the transponder for channel scan with OK .
Dish Setup-Procedure