Xoro HRS 2600, Руководство пользователя, Страница: 56 / 80

ENG 18
Engl
ish
Initial Installation
Preparation:
You will have to be informed of following points to make a successful channel scanning.
•
Towards which satellite does your antenna
orient?
•
If you have more than one antenna or one
antenna with more than one LNB, you will have
to know which type of switch (Toneburst or
DISEqC) is employed and to which port is each
Antenna LNB connected.
•
For a Unicable/SCR EN50494, you will have to
know which IF-Channel is available and its
corresponding Frequency.
Please ask the installer, if any of the parameter is not
known. If you live in a rental house or apartment,
please ask the renter.
Example for Germany:
The most satellite antennas orient satellite ASTRA 19.2° and have a “universal” or “Digital” LNB. We
recommend the pre installed list in the case.
If you would not like to use the pre programmed list, the common setup for ASTRA 19.2° is as
following:
Satellite:
019.2E Astra 1H.
LNB Type: 09750/10600
LNB voltage: 13/18V
22KHz: AUTO
Toneburst: None
DiSEqC 1.0/1.1: None
Motor: None
Dish Setup-preparation