EN-12
E
n
g
lis
h
Timer Service
Channel: Will switch to the channel when the timer is started.
Record: Only if there is a USB device, it will be recorded automatically when the timer is
started. And the recorded PVR will be saved in USB device.
Wakeup Channel Select the Channel from Channel List.
Event Name If you add a event timer from EPG, it shows the event name.
Wakeup Date Input start date of the timer.
On Time Set Start time of the timer.
End Time Set End time of the timer.
After Recording Set the status after the timer.
Auto: Back to the status that before the timer.
Standby mode: Go to standby mode after the timer.
Power on: Still power on after the timer.
Parental Lock
Parent Lock allows you to set limits for each program or change your previous password.
Other
1. Auto Standby It can standby automatic as the time that you set.
2. Standby Time You can set the time display on front panel when standby.
Information
Display version information such as software or hardware.
Factory Setting
You have the opportunity to make undo all the settings and changes by load the default
settings.
Note: All settings are reset. Then they should also perform the search again.
USB Upgrade & Save
Let you install a new software version on the device. This of course must be connected to
a USB HDD or memory stick with the update file in the root directory.
Upgrade & Save
Visit www.xoro.de to get update Firmware.
OPTION
