EN-10
E
n
g
lis
h
Installation
You should install the receiver when powering on your product for the first time after pur-
chase.
Tip: The default password is 0000. If you have forgotten your password, please contact
your local product distributor.
Powering On
1. Connect the power cord of the product to a wall outlet.
2. Power on by pressing the POWER button on the remote control or the POWER button
at the front of the product.
Initial setting
When you first use, you need to select the OSD language, Tuning Type, Country
Region,
You can see some options in this menu. There are Frequency, Symbol Rate, Scan QAM
Type, and Search.
Frequency
You can input the correct frequency with numeric button (0-9).
Symbol Rate
You can input the correct symbol rate with numeric button (0-9).
Scan QAM
You can press the
◄
/
►
button to select the scan QAM. There are 16-QAM, 32-
QAM, 64-QAM, 128-QAM and 256-QAM options.
Search Press OK button to start search.
*.
Easily switch DVB-C / DVB-T2.
Menu->Channel->DVB Tuning Type,
with the
◄
/
►
buttons.
Auto Search
Auto Search allows you to configure the cable setting parameters.
Menu->Channel->Auto
Tuning
Before search, you can select the country, and then you must select the correct network op-
tion which you want to search. And then move highlight to Search, and press OK button to
search.
