XONTEL XonTel XT- 60 PBX Скачать руководство пользователя страница 52

Страница: 52 / 117



Info: DTMF will be carried in the SIP Info messages



Inband: DTMF will be carried in the audio signal



Auto: will attempt to detect if the device supports RFC4733 DTMF.
If so, it will choose RFC4733; if not, it will choose Inband.

RFC4733 is the default mode.

Other Settings

Realm

Realm is a string to be displayed to users so they know which username and

password to use. If you

don’t know what to fill in, contact your service

provider for further instructions.

Send Privacy ID

Check this checkbox to send privacy ID.

Enable DNIS

Dialed Number Identification Service is a telephone service that enables a

company to identify which telephone number was dialed. Users could

configure DNIS to allow the IP phones to display which trunk is passing the

call.

DID Number

This number is used to identify which line of the trunk is passing the call.

DNIS Name

A name for this DNIS, when a call reaches the selected trunk, the name will

be displayed on the ringing phone.

4) DOD

DOD (Direct Outward Dialing) means the caller ID displayed when dialing out. Before configuring

this, please make sure the provider supports this feature.



Global DOD

Configure Global direct outward dialing number. DOD (Direct Outward Dialing) is the caller ID

displayed when dialing out. Before configuring this, please make sure the carrier supports

this feature.



Add One DOD with Multiple Extensions

Enter one DOD number and select multiple extensions.

Figure 5-4 Add One DOD with Multiple Extensions



Bind Consecutive DOD Numbers to Multiple Extensions

Enter the DOD number range and select the extensions.

Содержание XonTel XT- 60 PBX






















































































































Результаты поиска

Содержание XonTel XT- 60 PBX

Отзывы:

Бренды по названию

Популярные бренды

XONTEL XonTel XT- 60 PBX, Руководство администратора

Результаты поиска

Содержание XonTel XT- 60 PBX

Отзывы:

Бренды по названию

Популярные бренды