INSTRUCTIONS
INSTRUCTIONS
07
10
Bluetooth Function Operation
The system provides bluetooth handsfree communication function, if your cellphone supports
bluetooth function, you can establish a point-to-point connection between your cellphone and
the system. The system can also achieve the dialing, answering function, A2DP, the function of
phonebook on the screen.
Pair/link
The first time you pair your cellphone with the unit, the procedures below should be followed:
①
Turn the bluetooth function of your cellphone on.
②
The cell phone searches for bluetooth device and connect.
③
A prompt is displayed on the screen of the phone, to accept pair, enter the same numeric code
on the phone (0000) and press
[OK] button.
④
After the pair is completed, the name of the connected cellphone is displayed on the screen.
⑤
After recharged, the bluetooth system will automatically get connect to the lastly
disconnected cellphone.
Turn on/off Host
When the ignition switch is put in ACC or ON position, Press[ ] button on the front panel to
turn on the unit. After the host starts, hold [ ]button for 3 seconds , the host will turn off.
Access main interface
In boot-up state, press /SRC/MENU button on the panel to switch to main interface.
Touch
page. Touch the icon does not go into a long free mobile icon location. Touch the icons to enter
the corresponding functions. Touch
in two different interface style to switch between.
icon or at the touch pen / finger gently sliding the screen to switch the main menu
Rear view function menu (optional)
When the machine has a menu function, rear view, in the main screen, click icon to enter the
menu after reversing interface.
U Disc/SD Card function operation
When there is a USB device/SD card connected, the unit can conduct the playback of audio/
video/image files in the USB device/SD card.
Insert/eject SD card
1.
Insert a SD card recorded with media information into the SD card slot in the unit correctly
until it is locked.
2. When pulling out the SD card, exit SD card playing state first, then press the SD card and it
shall pop up after unlocking.
Insert/Eject USB storage device
1.
Connect a U disc recorded with media information to the unit by a USB connecting cable.
2. When there is a need to eject the USB device, exit the USB device playback screen first, and
then take out the device.
Note:
When the unit has front USB, only one of them.
Radio Function Operation
Touch [
RADIO
] icon in the main interface to enter into the radio interface.
Search/store station
1. Auto search and store station
(1) Touch [ ] icon in the radio interface on the panel
to search for station automatically. During search, the
searched stations will be stored automatically.
(2) During search, retouch [ ] icon to stop auto
searching.
Phonebook
After the cellphone gets connected to the unit, you can read
records in the phonebook of your cellphone and store
information in the phonebook of the unit.
phones may not support the phone book.)
( Note: Some
Call
records
Recent dialed calls, received calls and missed calls can be
saved in call records.
Select missed/dialed/
received calls
Clear all
After the successful pair, the bluetooth that indicates
connecting status will be lighted, otherwise, it will appear
dimmed
.
Touch [Disconnect] to disconnect the current connection; after
disconnected
。
Touch [Connect] to connect the disconnected bluetooth device.
Touch [Reset] icon to clear all pair records.
Bluetooth Interface Function Introduction
Dial
Call records
Phonebook
Music playback
Switch
