XOCECO LC-42HW36 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 53

XOCECO LC-42HW36 Скачать руководство пользователя страница 13

11

Working principle analysis of the unit

1. Analog signal
Antenna reception signal RF will be sent to integrative tuner (contain HF and IF amplifier circuit), the
tuner is controlled by the command (SDA and SCL) of the MCU N801(M16C), select appropriate
channel to system switch, via HF amplifier and IF amplifier decode, output video signal CVBS and
second sound signal SIF.
AV1, AV2 audio signal(AV1 and S-Video share the same audio channel), YPbPr1, YPbPr2 audio
signal, D-SUB/DVI audio, USB/PVR audio, HDMI and SIF are sent to N103(SGTV58xy audio
process and volume control) for audio switch, the selected audio signal is separated into left and
right channel and sent to digital audio amplifier N106(TPA3120) to amplify, then sent to speaker.

CVBS, AV1, AV2, S-Video signal (Y signal of S-Video and AV1 video share the same channel), USB
or YUV signal of PVR mode and D-SUB signal via matched resistance, the signal separately
through alone channel send to main IC NS01 (SVP-WX68) video switch, A/D transition, digital
decode, image scale and OSD superposition, then send to LVDS level drive for LCD screen.

Video signal of YPbPr1, YPbPr2 via matched resistance to video switch NB05 (PI5V330), after
switch the select signal will be sent to main IC NS01 (SVP-WX68) video switch, A/D transition,
digital decode, image scale and OSD superposition, then send to LVDS level drive for LCD screen.

2. Digital signal
HDMI1, HDMI2, HDMI3 digital signal via digital video switch NA04(PS301), select one signal to
send to main IC NS01 (SVP-WX68) video and audio separate first, video signal via digital decode,
image scale and OSD superposition to output LVDS level drive for LCD screen; digital audio signal
I2S will be sent to N103 (SGTV58xy audio process and volume control).

«
...
11
12
13
14
15
...
»

Содержание LC-42HW36






















































Отзывы:

Нет отзывов