background image

YE

AR

WARRANTY

To obtain service: 

 

32

     we’ve got your back

1 5

YE

AR

WARRANTY

PARTS + LABOR

COMPRESSOR

Call 973-403-8900 |email [email protected] | or submit a request on our website

www.xoappliance.com

90 DAY LOVE IT or LEAVE IT.  

For 90 Days all our products are backed by our unique Love it or Leave it Guarantee.

ONE-YEAR PARTS & LABOR LIMITED WARRANTY.

 XO warrants to the original purchaser of every new XO refrigerated unit, the 

cabinet and all parts thereof, to be free from defects in material or workmanship under normal and proper use and maintenance as 

specified by XO and upon proper installation and start-up in accordance with the instruction packet supplied with each XO unit. XO’s 

obligation under this warranty is limited to a period of one (1) year from the date of original purchase.  

FIVE-YEAR COMPRESSOR LIMITED WARRANTY.

 XO warrants its compressor to be free from defects in both material and workmanship 

under normal and proper use and maintenance service for a period of five (5) years from the date of original purchase. If the compressor

fails during that time period due to a defect in material or workmanship, XO will supply a replacement compressor free of charge.  The 

consumer will be responsible for all related transporation and labor costs.  Product must be registered with XO to qualify for this warranty. 

TERMS APPLICABLE TO EACH WARRANTY.

 Any part covered under the above warranties that is determined by XO to have been 

defective within the time frame is limited to the repair or replacement, including labor charges, of defective parts or assemblies. The 

labor warranty shall include standard straight time labor charges only and reasonable travel time, as determined by XO.

WARRANTY CLAIMS. 

All claims for labor or parts must be made directly through XO. All claims should include: model number and 

serial number of cabinet, proof of purchase, and date of installation. In case of warranted compressor, the compressor model tag must 

be returned to XO along with the above listed information.

WHAT IS NOT COVERED BY THIS WARRANTY.

 XO’s sole obligation under this warranty is limited to either repair or replacement of 

parts, subject to the additional limitations below. This warranty neither assumes nor authorizes any person to assume obligations other 

than those expressly covered by this warrant

or obscured serial numbers and commercial applications are excluded from these warranties.  Consumer shall be responsible for labor 

and transportation costs where noted above.

y.  Open box, factory seconds, scratch and dent, floor models, models with missing, altered

NO CONSEQUENTIAL DAMAGES.

 XO is not responsible for economic loss, profit loss; or special, indirect or consequential damages, 

including without limitation, losses or damages arising from food or product spoilage claims whether or not on account or refrigeration failure. 

WARRANTY IS NOT TRANSFERABLE.

 This warranty is not assignable and applies only in favor of the original purchaser/user at the

original installation location. Any such assignment or transfer shall void the warranties herein made and shall void all warranties, 

express or implied, including any warranty or merchantability or fitness for a particular purpose.

IMPROPER USAGE.

 XO assumes no liability for parts or labor coverage for component failure or other damages resulting from

improper usage or installation or failure to clean and/or maintain product as set forth in the warranty packet provided with the unit.

ALTERATION OR NEGLECT.

 XO is not responsible for the repair or replacement of any parts that XO determines have been subjected

after the date of manufacture to alteration, neglect, abuse, misuse, accident, damage during transit, improper installation, lack of scheduled 

 

maintenance as outlined in this manual, fire, flood, or act of God.

SERVICE  CONNECTIONS. 

XO is not responsible for the repair or replacement of failed or damaged components due to water supply, drain

 

or electrical power failure, high or low pressure, blocked drains, high or low voltage, use of extension cords, or improper grounding of the unit. 

YOUR RIGHTS UNDER STATE LAW. 

This warranty gives you specific legal rights and you may have other rights that vary from state to 

state. Some states do not allow the exclusion or limitation of consequential damages or a limitation on how long an implied warranty lasts, 

so the above exclusion or limitation may not apply to you.

OUTSIDE U.S. 

This warranty does not apply to, and XO is not responsible for, any warranty claims made on products sold or used outside 

the 48 continental United States.

Содержание XOUIM1565S

































Отзывы: