Xo XOQ30G, Инструкция пользователя

Страница: 16 / 76

- 16 -
Fig.3:
Put together the two parts
of the air deviator as shown in
picture
no 3.1.
It may be neces-
sary to cut the deviator to fit the
width of the chimney as shown
in picture 3.2 . A sharp blade or
Hacksaw is recommended to
trim the plastic.
Fig.4:
Take the air diverter
A
and drill two holes as
shown in the figure (hole diameter:
1/4” inches
).
Once the two holes have been drilled, fasten the
air diverter A to the bracket H .
Fig.5:
Fasten the air diverter
permanently to the wall with a
screw (the hole previously drilled
in
Fig.2
).
Fig.6
: Once the air diverter has been inserted
into the bracket and fastened to the wall connect
the flexible
(6
"
ROUND FLEXIBLE METAL DUCT
PIPE NOT INCLUDED) to the diverter and to the
connection flange.
6
"
ROUND
FLEXIBLE
METAL
DUCT PIPE
NOT
INCLUDED