Xo XOGSIDEBXLT, Руководство по эксплуатации и установке

Страница: 25 / 36

lighting the burners
5
With the cover removed - Open the gas supply valve.
Push and hold the knob in to start the flow of gas.
After 2 seconds, while holding in, turn slowly 1/4 Turn to the left.
You will hear the loud Click of the igniter.
Look to see the burner is fully lit.
If the burner does not light, turn the knob OFF
wait 5 minutes until the gas is fully dissapated
and repeat.
Always make certain all knobs are in the
OFF position when finished cooking.
XOGSIDEBXLT_
CAUTION
FRONT CONTROL REAR CONTROL
WARNING
OFF
Ignition
Point
High
Temperature
Low
Temperature
LIGHTING THE BURNERS WITH THE IGNITERS
Extremely cold temperatures may cause your burner to ignite inside the burner rather than outside.
Once lit, if you hear a “ WHOOSHING ” sound, immediately turn the burner knob OFF to extinguish
the flame. Then immediately re-light the burner.
COLD WEATHER WARNING: PROPANE