Xo XOGSIDEBXLT, Руководство по эксплуатации и установке

Страница: 22 / 36

gas hook up - natural gas
NATURAL GAS CONNECTION KIT INCLUDED WITH GAS GRILL
The Natural Gas Regulator and 1/2F to 1/2M brass connection is included with the gas unit. Always
use a Professional Installer when connecting to your gas line. The gas regulator which is included
is set up for natural gas but can be converted for use with propane.
Gas unit manifolds end in a 1/2" male thread and have a "Grip Nut" for a wrench. When tightening
these fittings, two wrenches are required. One to hold the Grip Nut and prevent it from moving while
the other wrench turns the opposing fitting. Failure to employ two wrenches this way places an undue
strain on the manifold and can cause damage and/or result in leaks.
Use plumbers putty or gas tape on the male threads to seal the
male threads to seal the connection.
Do NOT use sealant or tape on the flare side of a connector.
Connect the gas regulator and make certain the “IN” and “OUT” are oriented correctly. This is
marked in the casting. Gas will only flow in one direction. A gas flex line or hose can then be used
to make the final connection to the house supply line.
IMPORTANT:
An XOLQD Hose may only be used for Freestanding Grills.
Permanent installations MUST use SS Flex Line.
YOUR FINAL PIPING MUST INCLUDE
A LOCKING 1/4 TURN SHUT OFF
VALVE OUTSIDE LOCAL TO THE
UNIT FOR EMERGENCIES
Always use two wrenches to
tighten gas fittings
SEALANT
NO SEALANT
Gas
Supply
Inside
Wall
Outside
Wall
Shut-Off
Quick Disconnect
Locking
Shut-Off
Grill
Regulator
Swivel
Nut
Or Flex Line
2 2
ALL CONNECTIONS
MUST BE LEAK TESTED
PRIOR TO FIRST USE
12ft. XOLQD Hose (freestanding only)
When Using 12ft. XOLQD Hose
With Freestanding Grill