Xo OSSEO, Руководство пользователя

Страница: 12 / 25

XO CARE A/S
12 XO Osseo, User Guide YB-223 Version 3.00
Fig. 6
Start the handmotor as before by means of the foot control.
Programme step

is useful for lower speed/larger diameter drillings such as enlargement drillings
and final drillings.
D.1.4 PROGRAMME STEP

- TAPPING (FORWARD) / SCREW-IN
Enter step

by stepping on the select switch on the foot control (Fig. 4).
Fig. 7 is showing an example of a step

display reading.
Fig. 7
Start the handmotor as before by means of the foot control.
Programme step

is useful for low speed/high torque tapping for and screwing-in of
threaded implants.
D.1.5 PROGRAMME STEP

- TAPPING (REVERSE) / SCREW-OUT
Enter step

by stepping once again on the select switch on the foot control.
As shown in Fig. 8 the parameters are the same as in step

except that the direction of
rotation has been changed to be in reverse (counter clockwise).
Fig. 8
As soon as the handmotor is started in reverse, there will be an alarm signal and the direction symbol
on the display starts to flash.
Programme step

is useful for returning the threading tap and for screwing out threaded implants.
Speed = 800 RPM
Torque = 45 Ncm
Direction of rotation = forward/clockwise
Irrigation = about 50 % of max
Speed = 15 RPM
Torque = 45 Ncm
Direction of rotation = forward
Irrigation = about 50 % of max