more “q & a”
There doesn’t appear to be any power to the unit.
There are 3 easy to check common
causes:
(1) Check to see if a fuse has blown or circuit breaker has tripped & replace or reset.
(2) Check to ensure the plug is fully inserted into the outlet.
(3) A power surge may have caused the unit to shut down to protect itself - Unplug the unit,
wait 5 seconds and plug it back in.
The cabinet temperature is too high.
Check these 5 things:
(1) Check the temperature setting and adjust as needed.
(2) Make certain the door is completely closed and the door gasket is sealing properly.
(3) Avoid opening the door frequently and/or leaving the door open for extended periods.
(4) Did you load a large quantity of warm bottles at once? It is better to add smaller quantities
in several loads.
(5) Make certain nothing is blocking the toe kick vents (including dust behind the vents).
The alarm is beeping and “HI” is displayed on the control panel.
See the question and answers above - if the door has been tightly closed and you have not
recently added a large quantity of warm bottles, it may be a mechanical issue. Unplug the unit
and call for service.
The alarm is beeping and “LO” is displayed on the control panel.
This may be a sensor malfunction. Unplug the unit and call for service.
Why does condensation form on the inside or outside of my XO unit?
It may be that the door is either opened repeatedly or not closed completely. It may also be
due to an excessive ambient humidity, in which case it will clear when the humidity drops.
There is warm air coming from the bottom of my unit.
This is normal. Cooling systems must vent the heat they remove from inside the cabinet.
Why does the evaporator fan run all the time?
It continually recirculates air to ensure cabinet temperatures are consistent.
How do I adjust temperature?
Refer to Pages 7 & 10.
How do I adjust shelf height?
Refer to Page 20.
When does the high temperature alarm sound?
If internal temperature exceeds 70 F for more than 60 minutes.
If the door hinge is next to a wall, how much clearance do I need to open the door?
With the panel and hardware in place, the door must be able to open at leat 90
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
°.
°
23
faq’s
