Xnexus NXS 150, Руководство по эксплуатации

Страница: 6 / 20

Notice NOT 083
NXS 150
Rev : 00
Date : 13/10/05
SAFETY
The equipment you have just acquired will give you entire satisfaction if you respect the operating and maintenance
instructions.
Its design, the specification of the components and its manufacture are in accordance with the existing rules, French
standards (NF), ISO and CEI international injunctions, EEC general lines and CEN/CENELEC standards.
In this chapter, you will find safety rules in the use of electric arc welding power sources with coated electrodes.
We give you hereunder a list of recommandations and obligations you have to respect.
Safety rules must be observed, and particulary those relating to Decree 88.1056 dated November 14., 1988
concerning protective measures against electric currents.
2. ELECTROMAGNETIC COMPATIBILITY
2.1. DECLARATION OF CONFORMITY
NEXUS hereby declares that the machine object of this manual complies with the following European regulations :
Electromagnetic compatibility :
Rule 89/336-EEC of 3/05/89 modified by rules 92/31-EEC of 28/04/1992 and 93/68-EEC of 22/07/1993.
Low voltage :
Rule 73/23-EEC of 19/02/1973 modified by rule 93/68-EEC of 22/07/1993.
and with the national legislation transposing them.
NEXUS also declares that following harmonised standards have been applied :
EN 50199 (1995): Electromagnetic compatibility (CEM) – Product norm for arc welding material.
EN 50060 (1990): Current source for arc manual welding with limited service.
EN 60974-1: Security rules for electric welding material.
Part 1: welding current sources.
EN 50192 (1995): Arc welding material – plasma cutting systems.
2.2. INSTALLATION AND USE
The machine object of this manual complies with the European regulations about electromagnetic compatibility
89/336 CEE. It also complies with EN 50199 standard: Electromagnetic compatibility, product standard for welding
machines.
The user is responsible for installing and using the arc welding equipment according to the manufacturer’s
instructions.
USER’S MANUAL
Page
6/20