Xnexus NXP70, Руководство по эксплуатации

Страница: 13 / 19

Manual 0-4811 4-3 Operation
E. Typical Cutting Speeds
Cutting speeds vary according to torch output, the type of material being cut, and operator skill. Speeds
shown are typical for this cutting system using air plasma to cut mild steel, with output current at the
highest setting and the torch set at the indicated standoff height.
Unit Standoff
Material
Thickness
NXP70 3/16" (5mm) 1/4" (6mm) 129.7 3242 103.7 2593
NXP70 3/16" (5mm) 3/8" (10mm) 63.3 1583 50.7 1267
NXP70 3/16" (5mm) 1/2" (12mm) 38.0 951 30.4 761
NXP70 3/16" (5mm) 3/4" (19mm) 19.9 498 15.9 399
NXP70 3/16" (5mm) 1" (25mm) 14.4 361 11.5 289
Maximum Travel Speed
(ipm , mm/m)
Recommended Travel Speed
(imp , mm/m)