XNET Network Box Camera User’s Guide
22 of 47
5.4. Wireless Configuration
(XNET-Wireless Only)
For the case of a network camera having built in wireless LAN it is needed to set up wireless
LAN configuration parameters. Click “
Wireless Configuration
”.
Figure 5-5 Wireless Configuration
Field/Button
Sub Field
/Button
Description
Wireless LAN
Setup
WLAN Mode
Select “ESS” to use wireless interface. If “Disable” is
selected, Ethernet interface is used instead of wireless LAN
interface.
WLAN Radio
Select the mode of Wireless Radio.
SSID
Enter the ID of the wireless LAN access point to be
connected when wireless LAN interface is selected.
Authentication Select the type of authentication.
Encryption
Select the mode of encryption. If encryption is not needed,
select “OFF”
Key
Set the value of encryption key or pre-shared key.
Power level
Set the maximum transmission power level or wireless LAN.
WLAN
Information
MAC Address Indicates MAC address of the wireless LAN.
BSSID
Indicates the ID of the connected access point. In general
