xMount@Tube/Bike
Benjamin Hermann Handels UG
Mühlweg 12 c . 61169 Friedberg
+49 (0) 6 031 - 67 28 106
[email protected]
Contact:
www.xmount.de
•
Remove xMount from the packaging.
•
Fasten xMount at the fastening system selected by
you with the catch mechanism clicking into place.
•
Before using xMount, please check whether the
fastening system has clicked into place correctly.
•
You must notice a hearable click.
•
Fasten xMount Tube by loosening the two lateral
screws of the holder.
•
Place the rubber pads depending on the tube
thickness around the tube where to fasten the
mount. At least one pad is required to be used.
This pad protects the mount against slipping.
•
Now determine whether to fasten the iPad verti-
cally or horizontally by loosening the screw in the
centre of the fastening and defining the position.
Tighten this screw again now.
•
Now fasten both half shells using the lateral
screws. Check for an accurate stabiity.
