xMount@Air
•
Remove xMount from the packaging.
•
Fasten xMount at the fastening system selected by
you with the catch mechanism clicking into place.
•
Before using xMount, please check whether the
fastening system has clicked into place correctly.
•
You must notice a hearable click.
•
Fasten xMount Car for ventilation at the centre of
the double lamella of the centre console. Click the
clamps into the lamella and ensure everything is
properly secured and fixed.
•
For the stabilization of the holder please adjust the
hinge on the back side of the holder according to
your request.
•
Using the posterior adjusting screw you can indi-
vidually adjust the inclination angle of xMount as
well as the tower base which is turnable by 360
degrees.
•
Before usage, these adjusting screws are required
to be tightened.