Xmotos XB21A 2018 Скачать руководство пользователя | Manualshive

Страница: 4 / 60

background image

4

WHAT IS COVERED

:

Koolcnchet

warrants that this product is free of defects in material and workmanship for a

period of 6 months from the date of purchase, except as limited below. Warranty service and replacement parts are

warranted only for the duration of the warranty on the original product. The warranty coverage is for the following:



Engine and drive train – 6 Months



Front suspension – 6 Months



Rear suspension – 6 Months



Frame and swing-arm – 1 Year

WHAT IS NOT COVERED

: This warranty does not cover any conditions caused by misuse, neglect, negligence,

accident operation in any way contrary to the operating instructions in the owner’s manual, normal wear, alteration,

modification, improper or inadequate maintenance, use of unauthorized replacement parts, or service provided by

anyone other than an authorized Xmotos service center and/or dealer. This warranty does not cover transportation

costs for warranty service. Without limiting the above, this warranty is Voided with respect to any product that has

been used for rental or commercial purposes or that sustained the following damage:



Bent or broken frame or swing-arm due to abuse



Bent or broken wheels due to abuse



Bent or broken plastic shrouds due to abuse



Any sign of impact, accident, spin-outs or roll over not caused by the condition for which the warranty

coverage is sought.

TO GET SERVICE

: Contact your nearest Xmotos service center and/or dealer. The cost of transportation of the

product to and from the service center and/or dealer must be paid by the owner.
Xmotos obligation under this warranty is strictly and exclusively limited to the repair or replacement of defective

parts and Xmotos does not assume or authorize anyone to assume for them any other obligation. No service center

and/or dealer is authorized to modify this warranty.
All implied warranties are limited in duration to the stated warranty period, and are hereby expressly disclaimed in

their entirety after the expiration of the stated 6 month warranty period.

«
...
2
3
4
5
6
...
»

Содержание XB21A 2018





























































Отзывы:

Нет отзывов

Похожие инструкции для XB21A 2018

Бренд: ZERO GRAVITY Страницы: 6

Бренд: SRC Страницы: 5

Power Commander III 718-411

Бренд: Dynojet Страницы: 3

Бренд: Nolan Страницы: 80

Бренд: Two Brothers Racing Страницы: 2

Бренд: Malossi Страницы: 24

Бренд: DYNATEK Страницы: 4

1003007FONTANASPRINT

Бренд: DYNATEK Страницы: 7

Бренд: IBEX Страницы: 3

Бренд: KYMCO Страницы: 68

Бренд: KYMCO Страницы: 229

Бренд: KYMCO Страницы: 433

Бренд: HYOSUNG Страницы: 144

Бренд: Benelli Страницы: 314

Бренд: Benelli Страницы: 392

Бренд: Beta Страницы: 54

Бренд: Abus Страницы: 9

Бренд: Bikecomm Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды