XC-2 Ethernet Kit Quick Start Guide (1.1)
2.4
Troubleshooting the webserver application
LEDs do not light up
•
Check that the power supply is connected correctly.
X2LEDB LED does not light up
•
Check the ethernet cable is connected correctly to the XC-2.
•
May take up to a minute to obtain an IP address if no DHCP server on network.
X2LEDB LED lights up but browser cannot load http://xc2.local
•
Try installing Bonjour for Windows, available from: http://apple.com/downloads.
•
Disable any firewall you may have running.
•
Configure your PC and XC-2 to use a static IP address. See section
2.5
Firmware Updates
You can check the webserver firmware version using the Board Information page
on the
xc2.local
website. Check
www.xmos.com/xc2
for any firmware updates and
instructions on how to update the device.
3
XMOS Tools Support
The XMOS tools are provide in a single platform-specific downloadable file from
http://www.xmos.com/tools
Instructions on installing and using the XMOS Tools can be found in the XMOS
Tools User Guide
http://www.xmos.com/published/xtools_en
. The following table
provides a summary tools support for the XC-2 development board.
Minimum tools version required
9.9
Board support file
XC-2.xn
USB-to-JTAG adaptor
XTAG
USB-to-JTAG driver
FTDI
Board Tutorial
Integrated into XDE and available as PDF
Hardware Guide
http://www.xmos.com/published/xc2hw
www.xmos.com
