XM SkyDock, Инструкция по установке и эксплуатации

Страница: 18 / 36

18
Vehicle Installation
Docking the iPhone in the SkyDock
Inserting the Spacers
Your SkyDock comes with three numbered urethane spacers that assure a proper fit with
different iPhone and iPod touch models, with and without aftermarket skins (thin cases
that surround and protect the iPhone or iPod touch).
IMPORTANT: T
HE
S
KY
D
OCK WILL NOT ACCOMMODATE ALL
TYPES OF AFTERMARKET SKINS
. C
OMPATIBLE SKINS MUST
NOT BE THICKER THAN
2
MM IN ANY DIRECTION AND MUST
HAVE A LARGE ENOUGH OPEN AREA AROUND THE CONNECTOR
AT THE BOTTOM OF THE
iPhone/iPod touch
TO ALLOW IT
TO SEAT PROPERLY IN THE
S
KY
D
OCK
.
Spacer 1: For iPhone with compatible skin
Spacer 2: For iPhone without skin; for iPod
touch with compatible skin
Spacer 3: For iPod touch without skin
Install the appropriate Spacer by inserting it all
the way into the recess in the SkyDock (
top).
Removing the Spacers
1. Use one finger to apply sliding pressure on the
Spacer towards one of the Side Grip arms.
2. Using another finger, pry up under the edge of
the Spacer to release it (
bottom).
Recess
Spacer
1. Press Spacer &
Slide Towards
Side Grip
2. Pry Spacer Up
and Remove