XLT Ovens AVI Hood, Руководство по установке и эксплуатации

Страница: 38 / 102

38
Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
AVI HOOD INSTALLATION
Purchaser’s Responsibility
Check all local codes prior to installation. Special requirements may be necessary
depending upon building material construction. It is the installing contractor’s re-
sponsibly to ensure that the structure the hood is to be hung from meets all codes
and can carry the hood weight.
WARNING
It is the responsibility of the purchaser:

Thoroughly review the floor plans and specifications. The exact location of the oven must be
determined before installing the hood.

To unload, uncrate, assemble, and install the hood to it’s intended location.

To ensure that electric utilities are installed on site in accordance with local building codes and
with the specifications in this manual.

To see that electric utilities are connected properly by a qualified installer using the proper
hardware.

To ensure a qualified installer has performed an initial start-up procedure.

Location should minimize long and twisted duct runs. Make efforts to have a straight clear path
to the roof fan curb.

All hood supporting structures must be strong enough to support the weight of the hood and
shrouds. Refer to the Hood Dimensions & Weights page for weight.

Maintain the proper clearances from combustible materials according to International Me-
chanical code (IMC), and National Fire Protection Agency (NFPA) 96, and local mechanical
codes.