XLT Ovens AVI Hood Скачать руководство пользователя страница 28

Страница: 28 / 102

Technical Support US: 888-443-2751

Technical Support INTL: 316-943-2751

OVEN INITIAL START-UP

All ovens are tested at the factory for functional operation. Operation is verified and ad-

justments are made to ensure proper function. However, field conditions are sometimes different
than factory conditions. It is necessary to have an authorized service technician verify operation
and make field adjustments if needed.

The Oven Initial Start-Up Checklist, found at the end of this manual, must be completed

(both sides) at time of installation, signed by the Customer and returned to XLT Ovens and the Au-
thorized Distributor to initiate Warranty Policy.

If the Start-Up Checklist is not filled out completely and returned to XLT Ovens, then the

Warranty will not be honored.

Содержание AVI Hood







































































































Результаты поиска

Содержание AVI Hood

Отзывы:

Похожие инструкции для AVI Hood

Бренды по названию

Популярные бренды

XLT Ovens AVI Hood, Руководство по установке и эксплуатации

Результаты поиска

Содержание AVI Hood

Отзывы:

Похожие инструкции для AVI Hood

Бренды по названию

Популярные бренды