XLR8 MACh Speed G3 ZIF, Инструкция по установке и эксплуатации

Страница: 1 / 11

Default Actual Jumper Settings Bus ratio
Setting Speed
300 / 30 0 4.5 to 1
333 / 33 3 5.0 to 1
350 / 33 3 5.0 to 1
366 / 36 6 5.5 to 1
400 / 40 0 6.0 to 1
450 / 46 6 7.0 to 1
466 / 46 6 7.0 to 1
500 / 50 0 7.5 to 1
533 / 53 3 8.0 to 1
550 / 53 3 N / A N / A
600 / 59 9 9.0 to 1*
Installation and User Manual
MACh
Speed
ZIF ™
Installation and User Manual
Base Settings Switches in the “ON” position Jumper Settings Bus Speed Bus ratio
3 0 0 1 ,3,4,6 - 10,11,12 4 0 . 0 7. 5 to 1
3 3 3 3,4,6,7,8 - 9,11,12 4 8 . 0 7 .0 to 1
3 6 6 1,6,7,8 - 11,12 4 9 . 0 8.0 to 1
4 0 0 1 ,2,4,6,7,8 - 9,10 5 0 . 0 8.0 to 1
4 5 0 2,6,7 - 9,12 4 5 . 0 10.0 to 1*
4 6 6 1,2,6,7 - 9,12 4 6 . 6 10.0 to 1*
5 0 0 1 ,2,4,6,7,8 - 9,12 5 0 . 0 10 .0 to 1*
5 5 0 1,4,6,7 - 9,10,12 4 6 . 0 12. 0 to 1 *
6 0 0 1,2,4,6,7,8 - 9,10,12 5 0 . 0 12.0 to 1*
XLR8 MVP ™ Speed Settings
Master Chart
over
1. Install the latest version of XLR8 MACh Speed Control. 2. Locate CPU base
settings. 3. Remove and adjust card switches jumpers and/or dials (all available) to the relat-
ed settings in the chart below. 4. Remove motherboard cache from motherboard if possible.
5. Press CUDA reset on motherboard (with CarrierZIF only) 6. Reinstall card – boot system.
XLR8 Standard ZIF Settings
Set jumpers with card
oriented with CPU to left
and XLR8 right side up
ZIF Daughtercards
MACh
Speed G4
Z
™
MACh
Speed G3
Z
™
G3 and G4 ZIF Daughtercard upgrades for the
PowerMac G3 and the 400 MHz PowerMac G4
** Verify CPU multiplier with product – 9.0x, 10.0x and 12.0x based speeds not available on all CPU’s.
50 MH
Z SYSTEMS
–
WITH
C
ARRIER
Z
IF ADAPTER
* Verify CPU multiplier with product – 9.0x, 10.0x and 12.0x
based speeds not available on all CPU’s.
66 MH
Z SYSTEMS
P
OWER
M
AC
G3 (
BEIGE
)
Default Actual Jumper Settings Bus ratio
Setting Speed
300 / 300 3.0 to 1
333 / 300 3.0 to 1
350 / 350 3.5 to 1
366 / 350 3.5 to 1
400 / 400 4.0 to 1
450 / 450 4.5 to 1
466 / 450 4.5 to 1
500 / 500 5.0 to 1
533 / 500 5.0 to 1
550 / 550 5.5 to 1
600 / 600 6.0 to 1
100 MH
Z SYSTEMS
P
OWER
M
AC
G3 (
TRANSLUCENT
)
P
OWER
M
AC
G4 (400 MH
Z ONLY
)