• Observe the information when InterReView com-
pletes its tests. If you have any software “failures,”
you should reinstall the software in question.
2. You are now ready to begin capturing video.
Chapter 4 - Connecting the Devices
Page 25
Testing your set up with InterReView
™
Once the software is installed and the devices are connected,
you are ready to test the connections. We provide a software
utility (InterReView) that will check your set up and verify
that all components are working correctly. This step is
optional.
1. Open InterReView. This application will test your set up
and verify your video & USB connections and drivers.
• Open the InterView folder located in the XLR8 fold-
er, which is on the “root” of your system drive (creat-
ed by the InterView installer.)
• Double click on the InterReView software to launch
it. The application will automatically run its tests.
• Follow the instructions. In order to test USB, you will
be prompted to disconnect; then reconnect your
InterView device.
Note: If you do not complete this task, you will need
to restart your Mac for normal USB operation.
Chapter 4 - Connecting the Devices
Page 24
