6
U
SE
R
M
AN
U
AL
N
S6
/N
S1
2P
/N
S1
2P
F
Do not connect or disconnect the PowerCon
®
connector under load.
Protect the power lead from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus. When damaged, replace the power lead.
Unplug this apparatus during lightning storms or when unused for
long periods of time.
The NS12PF Ethernet switch contains two Class 1 laser devices. When
unconnected, the covers in the connector should block light emitted
by these devices. However, as additional safety measure, do not look
directly into this connector at any time.
The used laser-based transceivers are classified as AEL Class I (U.S.
21 CFR(J) and AEL Class 1 per EN 60825-1 (+A11). They are eye safe
under normal operating conditions and under all reasonably fors-
eeable single fault conditions per EN60825-1. TUV Rheinland has
granted certification to these transceivers for laser eye safety and
use in EN 60950 and EN 60825-2 applications.
Disclaimer
All rights reserved. Although the information in this manual has been
compiled with care, individual items may vary in size, ratings and
functionality from what is included in this manual.
XLNT disclaims any liability for damage, losses or other consequenc-
es suffered or incurred in connection with the use of the measure-
ments, data or information contained in this manual. XLNT may
change this product without prior notice.
EtherCon
®
, OpticalCon
®
and PowerCon
®
are trademarks of Neutrik
®
A.G.
Important safety instructions
