XLine Laser DIANA, Руководство пользователя

Страница: 3 / 12

3 DIANA LIGHTING PROJECTOR
1 mIC Receive music Power switch
2 mIN maX Music sensitivity potentiometer
3 aDDREss DmX address
4 DmX512 INPUT DMX512 signal input
5 DmX512 OUTPUT DMX512 signal output
6 110–220 V / 50–60 Hz Power input
7 POWER Power switch
FuNCTION TABLE:
INSTALLING:
1. Before installing, please make sure you are using a power supply voltage which match with the voltage of
this product.
2. Required of the professionals to install, this product will be firmly fixed, and transferred to the appropriate
projection angle.
3. Install this product, please ensure that at least 0.5 meters away from the port out of range of light there is
no flammable and explosive items (decorations, etc), and to ensure that the product and the wall for more than
30 cm intervals.
4. Make sure the product and channel cooling fan is not blocked by other objects.
5. Use the lamp to withstand 10 times the weight of the rope through the insurance, the insurance connector
for auxiliary hoisting rope.
OPERATION wAyS
1. Sound active Mode
Push the switch 1 — 10 of the address code switch to «OFF».
Connect with the power adjust sound sensitivity knob to satisfactory result.
2. Auto mode
Push the switch 1 of the address code switch to «ON», other switch is «OFF».
3. DMX Control
Push the switch 1 and switch 10 of the address code switch to «ON».
Note: When it’s switching operating mode, it needs to reboot to be effective.