The Battery charger included with the X260 has been designed to safely charge the
LiPo battery.
CAUTION: All instructions and warnings must be followed exactly. Mishandling of
LiPo batteries can result in fire, personal injury and/or property damage.
1. By handling, charging or using the included LiPo battery you assume all risks
associated with lithium batteries.
2. Do not exceed the recommended charge rate.
3. Never charge the LiPo battery unattended.
4. If the battery starts to balloon or swell at any time, please STOP using the battery
immediately. If you are charging or discharging STOP and disconnect. Continuing to
use, charge or discharge a battery that is ballooning or swelling can result in a potential
fire hazard.
5. Always store the battery at room temperature in a dry area for the best results.
6. Always transport or temporarily store the battery in a temperature range of 4.5°C -
48.5°C.
7. Do not store the battery or model in a vehicle in direct sunlight. If stored in a hot vehicle
the battery can be damaged or even catch fire.
8. Do not use a Ni-CD, Ni-MH or any other charger other than the supplied Li-Po charger.
Failure to use the correct charger may cause fire resulting in personal injury and/or
property damage.
9. Do not cover the warning labels with hook and loop strips (Velcro), or any other labels.
Warning: Do not use a 12V power supply, only use the original charger supplied
from our company. Failure to do so could cause property damage and/or injury.
Notice: If the voltage of the LiPo battery drops below 3V it may be damaged or
discharged; please land immediately and charge the battery to avoid damaging the
quadcopter or battery.
