-11-
Motor replacement
Note:
The plane after using. Motor will be catch a
high temperature, before it’s not cool,
please do not touch and change motors,
in order to avoid burns.
B
A
C
D
E
1. Remove 2 pcs screw from firewall by twisting.
2. The motor one the firewall tried to pull out.
3. Remove the screw which one on motor
by twisting.
4.Separate motor with fixed plate,
re-placement the new motor.
How to eliminate abnormity
The status
reason
countermeasure
When the flight signal
light flash, control No
reaction
Transmitter and plane code
binding is not successful
Binding again as the code bind
steps according to the warns
in page sixth
Plane do not start
after power on
The gyro motor
starts to work
When the plane with
battery, the throttle
Make the throttle rocker in the
right position put throttle trim
return to the middle point and
put battery
After the plane in battery,
The throttle is not working.
signal light is normal,
Steering gear is working
properly
When the battery power is low, the
ESC into shutdOff protection
charge the battery or replace the
battery which with full power
