!
!
6. Motion Detected Alert
The Master Controller will receive an alert (call or SMS) once the
device detects vibration indictaing possible motion.
!
6.1 Vibration sensitivity:
The device you have purchased is equipped with a sensitive
Vibration detection system. Since certain applications are more
sensitive to external vibration sources, the sensor has variable
sensitivity settings. The unit comes from the factory pre-set to
#1, on a scale of 1-5, with 1 being the most sensitive. If you
notice you are getting excessive false movement alerts (like
when a heavy truck drives by), you can simply send the following
SMS to the unit, and reset the variable:
!
SMS:
*sensitive*1-5*
(where X = 1-5, 1 being the most
sensitive, 5 the least)
1=3seconds continued vibrating
5=15seconds continued vibrating
Default setting is 1 (per the explanation above)
!
Device Response:
“
Notice
: Vibration sensitivity is set to 1-5.”
!
6.2 SMS or CALL Alert Settings:
The Alert function(s) can be set accordingly with the
following SMS commands.
The system default setting is call
alert.
!
SMS:
*alertoff*
Device Response:
“Notice: System has ended alert function.”
SMS:
*smsalert*
Device Response:
“Notice: System has entered SMS alert
function.”
S
M
S:
*callalert*
Device Response:
“Notice: System has entered call alert
function.”
!
Note:
* By Default, the Alert System automatically initiates a
