Xitrix DeskFrame MX-910, Руководство пользователя

Страница: 58 / 89

- 52 -
Chapter 5: Maintaining Your Computer
Replacing the system battery
If the computer clock does not keep time or the settings in the BIOS Setup utility are not
saved when you turn off your computer, replace the system battery. Use a battery of
the same size and voltage as the original battery that was in your computer.
Â
To replace the battery:
1. Restart your computer.
2. During the restart, press and hold the F1 key. The main menu of the BIOS Setup
utility opens.
3. Write down all the values in the menus and submenus, then exit from the utility.
4. Shut down your computer.
5. Remove the side panel by following the instructions in “Removing the side panel” on
page 46 .
6. For more stability, place your computer on its side. To avoid scratching the case,
place it on a towel or other non-abrasive surface.
7. Locate the old battery on the system board and note its orientation. You will need to
install the new battery the same way.
8. Push the battery release tab. The battery pops out of the socket.