6.
If completed successfully, scan will return a list of available devices that are
ready for pairing. Your Infotainment System will be recognized as XSG3.
Select XSG3 on your mobile phone to begin pairing.
7.
If your mobile phone supports phonebook transfer, tap PHONEBOOK
DOWNLOAD will appear on the screen. This will download all of your phone
contact into Infotainment Center.
Notes on Pairing:
1.
If
PAIR START
appears temporarily, the pairing cannot start due to an active
connection. Please disconnect any active mobile phones.
2.
Only when
PAIRING
is displayed, the Infotainment Center becomes visible for
mobile phones. Use your mobile phone to search for the Infotainment Center to
connect to your mobile phone.
3.
When connecting, the Infotainment Center will identify itself to your phone as
“XSG3”. The mobile phone will ask for a PIN code. The factory default code is
“0 0 0 0”
(this code can be changed, see Bluetooth settings). Once the mobile
phone confirms that it has established a new paired connection, authorize the
Infotainment Center to make an automatic connection.
4.
When the pairing procedure is completed successfully, the display will show
PAIR OK.
When
PAIR FAIL
appears on the display, repeat the pairing procedure.
5.
Once the Bluetooth pairing is completed between your mobile phone and the
Infotainment Center, both will be automatically recognized and the connection
can be made automatically from that moment on.
6.
If there are more mobile phones paired to the Infotainment Center and within
range, the connecting priority is given to the last paired mobile phone.
7.
In case that pairing fails after each attempt, please turn off both your mobile
phone and the Infotainment Center. Turn both on again and repeat the procedure
as above.
Pairing your Phone
To pair your compatible mobile phone to the Infotainment Center please have
your user manual for your mobile phone and follow the instructions below:
1.
Go to the Bluetooth screen by selecting the Bluetooth icon from the Main Menu.
2.
When Bluetooth is accessed for the first time, it will show NO CONNECTION
on the screen (Above picture).
3.
Tap to access the device list. If accessing for the first time, the screen will
show NO PAIRED DEVICE.
4.
Tap to start pairing mode. The screen will show PAIRING. This means
that your Infotainment System is now visible to your mobile phone.
5.
Follow the pairing instructions for your mobile phone. In general, one will have
to turn the Bluetooth on, and then scan for the available devices.
BLUETOOTH OPERATION
Page 11
Copyright © 2018 Xite Solutions North America. All Rights Reserved | User Manual Version 18042019.01
