Xirrus XR-1000 Series, Быстрое руководство по установке

Страница: 5 / 16

3
4
Secure the T-Bar Clips to the Ceiling Support Grid
Refer to Figure 3 .
Twist the four T-bar clips onto the metal ceiling support grid at the marked locations and
tighten the screw posts to 10-12 lbf.ft (1.38-1.66 kgf.m).
Do not overtighten the screw posts .
Cut an access hole for the cable in the ceiling tile.
You MUST use the mounting studs that are furnished with the ceiling mounting bracket
accessory kit for the XR Array. Do NOT reuse the longer ones furnished with XS or XN
Arrays—they will interfere with and scratch the XR Array.
Figure 3. Securing the T-Bar Clips to the Grid