Xirrus XR-1000 Series, Быстрое руководство по установке

Страница: 11 / 16

9
license in this way after it boots up, if it has Internet connectivity. You should see the key in
the
License Key field.
In the Admin Settings section, change both the default admin username and password to
improve Array security. Enter New Admin User and New Admin Password , then Confirm
Admin Password . Leave New Admin Privilege Level at read/write . Click Apply Admin
Settings when done.
Be sure to record the new account name and password, because the default admin user will
be deleted!
Quick Configuration (near the bottom of the page): This offers predefined configuration
options such as Classroom and High-Density that capture best practices from years of field
experience. If one of the options in the drop-down list is appropriate to your deployment,
select it and click
Apply . For example, the High-Density option uses best practices to
configure the Array for high density settings such as lecture halls, convention centers,
stadiums, etc.
If you make changes to the SSID Settings section, click the associated Apply button to
apply your changes.
Click Save Changes to Flash on the upper right to save your settings.
Click Execute at the bottom of the page to set up/enable all IAPs (radios) automatically.
For improved security, you must also take the additional steps described in “Securing Low
Level Access to the Array” on page 10 .
With a basic configuration established the Wireless Array is now functional. Refer to the
Wireless Array User’s Guide for additional configuration information. Look for the section
titled Performing the Express Setup Procedure near the end of the Installing the Wireless Array
chapter of the Guide for more details on Express Setup settings. The chapter titled
Configuring the Wireless Array discusses all of the settings available for the Array.