Xirrus XK-RDW-100-N Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 28

Xirrus XK-RDW-100-N Скачать руководство пользователя страница 22

20

Alternative Settings

mentioned in

Step 6 — Connecting wireless clients

. If you set a different key for an

SSID, clients must use that key to connect to the SSID.

5.

Click the

Enabled

checkbox for your new SSID. Uncheck the

Enabled

checkboxes for

the other SSIDs if you do not want your clients to use them.

6.

Click the

Save

button.

7.

Your clients can now connect to the new SSID. They will lose any existing connections
to SSIDs that have been disabled.

Change DNS servers (if needed)

Enter DNS Server here

The Array is pre-configured to use DHCP to assign IP addresses to wireless clients. At the
same time, DHCP will tell clients which DNS servers to use. By default, servers at

are used. To specify your preferred DNS servers instead:

1.

On the left of the WMI, click

Services

, then click

DHCP Server

. (

2.

Select a DHCP entry. In the

DNS Servers

column, enter the IP addresses of up to three

servers. The first server is normally used, and the second and third servers are used in
case of failure of the primary (and secondary) servers.

3.

Enter DNS servers for the other DHCP entry in the same way.

4.

Click the

Save

button.

Figure 15. Changing DNS servers on the DHCP Servers page

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

«
...
20
21
22
23
24
...
»

Содержание XK-RDW-100-N





























Отзывы:

Нет отзывов