10
Step 2 — Connect the power supply
Step 2 — Connect the power supply
100-240
VAC
PoGE Injector
IN
OUT
Data +
Power
Network
Connection
The injector supplies power and data to the Array on a single Cat 5e Ethernet cable.
Figure 5. Power over Gigabit Ethernet (PoGE) supplies power and data to the Array
1.
Select a location for the injector. It must be in a dry, dust-free location, close to a 100-
240 VAC power source. The injector may be placed closer to the Internet connection
(within 14 feet), or closer to the Array, whichever is more convenient.
2.
Plug the supplied power cord into the back of the injector unit and into a dedicated
AC power outlet (100 - 240 VAC). The injector’s
ON
LED should light (green).
3.
Using either the 14’ black Cat 5e cable or the long
orange
cable, connect the injector’s
IN
port to the Ethernet port providing your Internet connection. Use the shortest
cable that will work.
4.
Connect the other supplied Cat 5e cable to the injector’s
OUT
port.
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Содержание XK-RDW-100-N
Страница 1: ......
Страница 4: ...2 4Gon www 4Gon co uk info 4gon co uk Tel 44 0 1245 808295 Fax 44 0 1245 808299 ...