Hardware Installation
1-3
Other Requirements
1
For connection to a
100Base-TX Ethernet network
, a
Category 5 (data grade) unshielded twisted pair (UTP)
network cable terminating in a male RJ-45 connector and
connected to a 100Mbps hub or switch.
2
For connection to a
10Base-T Ethernet network
, a network
cable terminating in a male RJ-45 connector and connected to
a 10Mbps hub or switch.
3
For
modem
operations: an analog telephone line, RJ-11
modular telephone cable (supplied), and if needed, RJ-11
adapter for the local telephone system. Communications
software is also required for modem and fax operations.
The two RJ-11 ports on the RealPort Integrated PC Card are
identical: use one to connect the modem to the telephone
line, the other for an approved telephone set. Some coun-
tries prohibit or restrict use of two RJ-11 connections.
Inserting the RealPort Integrated PC Card
4
LINK INTEGRITY
ORANGE - 100Mbps
GREEN - 10Mbps
1
TRANSMIT/RECEIVE (YELLOW)
2
CARRIER DETECT (GREEN)
3
LAN ACTIVITY (YELLOW)
MODEM LEDs
LAN LEDs
PC CARD TYPE III OR DUAL
TYPE II SLOT
If you previously installed a Xircom
CreditCard Ethernet 10/100+Modem 56
(Model CEM56), just insert the RealPort
Integrated PC Card and go. No new
software installation is required.
1
23 4
