Xinje TS Series, Руководство пользователя

Страница: 10 / 27

4
1-3-2. Interface description
The HMI of Xinje TS3 series is described as follows:
Appearance Name Function
1 2 3 4
1 2 3 4
Dial switch Used to set forced download, touch calibration, etc
Download
COM1
COM1 Support RS232/RS485 communication
PLC
COM2
COM2 Support RS232/RS485/RS422 communication
USB-A port
USB flash disk can be inserted to store data, and USB
flash disk can be imported into the project
USB-B port Connect USB cable to upload/download program
Ethernet port
Support communication with TBOX, Siemens S7-1200,
Siemens S7-200 Smart and other Modbus TCP devices
1. Dial switch
TS3 series HMI has a set of 4-bit dial switches, which are located at the bottom right of the back. Its setting
functions are as follows:
Switch DIP1 DIP2 DIP3 DIP4 Function
Status
ON OFF OFF OFF Undefined
OFF ON OFF OFF USB flash disk import program
OFF OFF ON OFF Touch screen calibration
OFF OFF OFF ON Undefined
2. Communication port
(1) COM1 port pins definition
Pin Name Explanation
1 NC Null signal pin
2 RXD RS232 communication receive data
3 TXD RS232 communication send data
4 A RS485 communication
5 GND Signal ground
6 NC Null signal pin
7 B RS485 communication signal -
8 NC Null signal pin
9 NC Null signal pin