Congratulations on your 10.000 mAh powerbank with dual input!
This powerbank is a charging system for mobile phones and other small
portable electronic devices. It contains a 10.000 mAh A-grade Lithium-ion cell.
It will fully charge an iPhone, Android or other common mobile phones with
each charging cycle.
To charge the powerbank:
• Plug in the supplied cable to your wall charger or computer USB port. The
USB connector goes to your charger, the Micro USB goes to your powerbank.
• If fully depleted the powerbank will take around 2-3 hours to charge fully.
• When fully charged disconnect the powerbank.
To charge the powerbank you can also use your Apple© Lightning Cable.
Simply stick the lightning part of the cable in the powerbank lightning port and
the USB end in your PC or laptop.
To charge your mobile or device
• Plug the cable into the USB port on the power bank, the other end goes into
your device.
• Your device will show a charging condition in the usual way, blue light will
show on the power bank.
• After you have charged your device, recharge the power bank before using
again.
Warning!
• Do not place or use the product at high temperature or in a humid
environment.
• Keep the product out of reach of children.
• Do not vigorously shake, hit or throw the product.
• If the power bank is not used for long time, please charge/discharge it once
every three months to ensure the service life of the product.
ENGLISH
