5
Methods for handling common abnormal phenomena
The following tips will help you detect and eliminate
common exceptions and errors.If you encounter an
exception.Symptoms are not listed in the table below,
please contact your supplier, all these anomalies or
errors can only be Investigation and correction
by manufacturer or specially trained personnel.
abnormal phenomena
process mode
After connecting the
power supply, long
press the down button
and there is no
reaction.
Check whether the connection cable
is normal.
After connecting the
power supply, press the
up or down button and
there is no reaction
Check whether the connection cable
is normal.
Slow rise
Check whether the load of the
lifting table exceeds the limit
weight specified for this product.
The lifting table often
enters the reset state
Check whether the load of the
lifting table exceeds the limit
weight specified for this product.
Lifting table lifting
direction is opposite
to the direction
specified by the
controller
Discontinue use and contact your
supplier or distributor.
It can only go down, not
up
Long press the down button to
reset.
Display Er1 after
working over schedule
requirement
After exceeding the working system
requirements, the DISPLAY Er1
control system enters the super
thermal protection function, and
the lifting table is suspended for
18 minutes before use.
The lift table slides
down by itself
Check whether the load of the
lifting table exceeds the limit
weight specified for this product.
The height of ascent and
descent varies
Perform the reset operation.
Note: If the above operations cannot solve the abnormal
phenomenon, please contact your seller in time
Matters needing attention
1. Power supply: AC100V-240V.
2. Operating environment: 0-40
°
C.
3. Before cleaning, you must unplug the power
supply. When cleaning, you can use a slightly
damp cloth to wipe the dust, avoid too much
water into the parts, do not damage the
connection line, do not touch the connection of
the plug.
4. Before using the product, check whether the
product is properly installed.
5. Familiarize yourself with all functions and
procedures before using the product for the
first time.
6. Slight noise of multi-wedge belt or brake
system caused by structure will not have any
influence on the use of equipment.
7. Do not use corrosive materials to clean the
equipment.
8. Children should not be cleaned and
maintained without supervision.
9. If the power cable is damaged, it must be
replaced by the manufacturer or a professional
to avoid injury.
10. If necessary, please keep the original
packaging of the equipment for your future
transportation.
Содержание CTHT2-F5S26
Страница 1: ...1 CTHT2 F5S26...
