manualshive.com logo in svg

XiNCOM Twin WAN XC-DPG503, Руководство пользователя

Поделиться
Скачать
XiNCOM Twin WAN XC-DPG503 Скачать руководство пользователя страница 80

Twin WAN Series – User Guide | v1 

 

Section 3: DNS Configuration 

 
Register your Domain Name with an Internet Name Registrar. Log into your Domain 
Name management console and locate the domain name settings for NS1 and NS2 (some 
Registrar services use up to NS3 and NS4). Input the IP address from your Twin WAN 
Gateway's WAN 1 and WAN 2 to your domain name’s NS1 and NS2 settings. 
 

Domain Name Management Console 

NS1.xxx.xxx.xxx: [ Input IP settings from WAN 1 ]  

NS2.xxx.xxx.xxx: [ Input IP settings from WAN 2 ]  

 
It will take up to two or more days for your domain name records to propagate to all the 
servers on the Internet. 
 

NOTE: Please consult your Internet Name Registrar for any specific information 
regarding your domain name management. 

 

 

Domain Name Server Configuration 

 
The XC-DPG602 and 603 have 2 DNS servers built-in (one for each WAN port). The 
device can support 1 SOA record, 2 MX records and 10 A records per DNS server. 
Before configuring any domain name through the XiNCOM gateway, all domain names 
are required to be registered through a Domain Name Registrar or Reseller. If you plan to 
use two or more domain names you must designated a host domain as an SOA record 
through the Configuration DNS menu. All other domain names should be configured 
through the Map Host URL as an A Record.  
 
Prior to configuring the Authoritative DNS on the XiNCOM XC-DPG602 or 603, it is 
recommended that you configure all of the WAN lines that will be used. 
 

•

 

Click DNS Configuration from the main menu and Select Configure DNS.  

•

 

In the Configure DNS section enter you domain name server host configuration 
and submit the changes.  

Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved. 

79

Содержание Twin WAN XC-DPG503













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды